Filtration - Sand Filters

HIGH RATE SAND FILTRATION SYSTEMS
with extensive lateral system for greater flow

MULTI-PORT VALVE POSITIONS

FILTER - Normal filtration, water recirculated


BACKWASH - Reverses flow, cleans filter, water to drain


RINSE - Rinses and settles sand, water to drain


WASTE - Bypasses filter, water to drain


RECIRCULATE - Bypasses filter, water recirculated


CLOSED - Shuts off flow to filter

FILTERING CYCLE


Turn pump OFF and position handle to "FILTER".

Start pump and note pressure reading.

Operate in the "FILTER" position until the pressure increases 30 kPa then backwash the filter.


BACKWASHING FILTER


Turn pump OFF and position handle to "BACKWASH".

Start pump and operate for 60 seconds or until the
water is clear in discharge sight glass.

Turn pump OFF and position handle to "RINSE".

Start pump and operate for 30 seconds.

Turn pump OFF, position handle to "FILTER".

Start pump, check clean filter pressure and resume Filtration Cycle.


USE WITH POOL CLEANERS


Disconnect Pool Cleaner when backwashing the Filter.


Features:


Robust construction, highest quality materials


Smooth action multi-port valve selection


Higher filtering and backwashing rates with 12 large diameter laterals


Cycle tested to 40 years of service


Model No: SF650


Diameter: 640mm


Height: 92 mm


Nominal Sand Area: 0.32m2


Sand Weight: 120kg


Max Flow Rate: 400 lpm


Max operating Pressure: 200 kpa


Laterals: 12


Warranty Conditions:


i) For warranty details please refer to your warranty card enclosed
with the filter.


ii) Pressure and flow rates are nominal


iii) The manufacturer reserves the right to alter product specifications without notice.